#Which way should my fan spin how to
#Which way should my fan spin driver
#Which way should my fan spin Patch
#Which way should my fan spin full
#Which way should my fan spin windows

The right setting can make the room feel cooler when you are not yet using your cooling equipment in spring, but it is warm outside already and it can make your room feel warmer when you are still preparing your heater for the test run, but the nights are already cold. Useful in spring and fall, too – a ceiling fan is very useful at the end of the spring and at the beginning of fall, too.When you use that setting, the warm air that rises and collects right under the ceiling will be sent downward by the blades, thus increasing the temperature of the air in the lower layers The heat redistribution setting – the right setting in winter is the clockwise direction.The setting will pull the air downward toward the center of the room, which will make the room feel much cooler than it actually is The cooling setting – to reduce the temperature in your room in summer, set the blades to rotate in the counterclockwise direction.

#Which way should my fan spin how to

The role that your fan performs depends on the direction in which the fan blades are spinning – here is how to set the unit correctly: This allows you to lower the temperature in the room a few degrees. The ceiling fan will pull up any cool air and send the warmer air that rises towards the top of the room down, making the room feel warmer.

Warm air naturally rises towards the ceiling. In terms of which wine version, I’m running the default Lutris-6.0 version for these tests.Ceiling fans are very useful devices throughout the year – in summer, they cool your rooms, while in winter, they redistribute warm air to enhance thermal comfort and they help your heating and cooling equipment no more efficiently all year around. Set your ceiling fan direction to spin clockwise and put it on the lowest setting available. This all, unfortunately for comparison sake, is not on the Debian based installs I had, this is on a fresh updated Manjaro install. However, this is better than the ~780 rpms I’m getting, still not trustworthy though for a 3 hour raid! So somewhere something is not happy in-game.

#Which way should my fan spin Patch

So the above seems to be in order and pretty much hits the correct fan curve.įor a test in WoW patch 9.05, I now get the following various results depending on which version of DirectX I’m using.ĭX11 Legacy 63 dC rpm (game is pretty much a slideshow as it stutters)ĭX12 66 dC 970-1000 rpm (great gameplay, smooth) Lutris/Win exe - tops out at 63 degrees C and fan speed is ~1,350 rpm. Native Linux - tops out at 65 degrees C and during that time the fan speed is ~1,450rpm.

#Which way should my fan spin full

Both running 1920x1200 full screen, Direct X11 no vsync. In order to compare like for like I had to switch to Gnome on XOrg as Gnome Wayland locks the refresh rate on Lutris/Win to 60fps.

#Which way should my fan spin windows

OK, so I’ve run the Windows version in Lutris and compared that to the Linux executable. Thank you for your reply and suggestions. I’m thinking there is something else I’m not seeing / doing? I can’t understand how the card will work while running the Valley benchmark and then act completely different in the same environment under Lutris?

I’ve tried various Lutris settings relating to graphics, no change. Standard DXVK shipping with Lutris, I’ve also tried 'doitsujin’s DXVK builds, same results. I’ve not tested under Steam yet as I don’t have any steam games, but I’ll see if I can test that later. I haven’t tried another distro such as Manjaro yet, I will give that a go. so the most common technical question that people ask regarding ceiling fans is 'What direction should my fan spin during the summer and winter' and 'Why' Quick Answer: I say quick answer, because this is.

#Which way should my fan spin driver

Under Debian I’m running the firmware-amd-graphics package, PoP has the driver baked into the kernel. Find out which way a ceiling fan should spin or rotate during the summer or winter. I’ve also tried Wine (5.0), Wine Staging and the same happens. I’ve tried and tested this now on the latest PoP_OS! release, Debian 10 (4.19) and Debian 11 Testing (5.11), all with the same results. In Lutris, if I play WoW / GW2 the card temps will ramp up to 85-95 degrees C and the fans will stay at ~780 rpm. The card also works as expected in my MacPro or under Windows in the same linux box (tested last night). Fans respond to load and temps during the whole benchmark, this is normal behavior. The fans will ramp up to about 1,700 rpm when the GPU hits 50 degrees C and then slow down again. Remember to adjust your thermostat to take advantage of those energy savings. The card works perfectly fine when stress testing with Valley benchmark in Linux. Press the direction switch to set your ceiling fan to spin counterclockwise for the summer, and press the button in the opposite direction to set your fan to spin clockwise for the fall and winter. I’ve got a Sapphire Pulse RX 580 card in my linux box, for some reason the GPU fans will slightly increase in rpm when I start playing something in Lutris, they will then spin down to idle speed (~780rpm) and not change again, irrespective the load or temperature on the GPU.